2″ Round Bottoms for Tumblers – Drive Wisely WaterSlide – Two cute Owls sitting in the Stars


2″ Round Bottoms for Tumblers – Drive Wisely WaterSlide – Two cute Owls sitting in the Stars


2″ Round Bottoms for Tumblers – Drive Wisely WaterSlide – Two cute Owls sitting in the Stars, theses designs can be made on White or Clear water slide paper.  These designs feature a cute round Owl with Drive Wisely above its head or you can chose, the design that shows a cute owl couple sitting in the stars. If you are wanting to get them all I do also have a bundle grab bag feature that I run typically once a week.  These can also be made into Stickers or Sublimation transfer.

If you chose the 3″ cut then at least one side will measure 3″ x ?,  one side will be at least 3″ high or wide, typically the height is the 3″ if you want it to be the width please message me to let me know.

These beautiful designs are printed on clear waterslide decal paper. Each image is laser printed in a high quality resolution (no need to be sealed) only thing you need to do is cut it and add some water and apply it to your awesome item/tumbler.

The sizes offered are perfectly sized for 20oz, or 30oz, tumbler.  If you have another item you would like to add it to, I also have a number of other sizes available.  I typically keep the ratio of the design intact, and enlarge or decrease the height of the design, so that is does not get distorted.

The actual waterside will come without the watermark.

Each clear Waterslide comes in a Block cut, as it is much easier to apply, then if the image is cut to close to the design.  If you would like the image to be mirrored please notate that in the NOTE section, all images will come printed upright.

Please see the instructions below:
1. Cut out the image (unless not in sheet, then the image comes in a block cut)
2. Place it in warm water for approx. 30 Seconds
3. Wet down area on tumbler that you’d like to place the waterslide
4. Slide the waterslide onto the tumbler.
5. Take a damp paper towel and smooth out and wrinkles in the slide.
6. Let completely dry before adding epoxy.

You will receive just the water-slide paper, no other product to add this to is included.

This listing is for qty (1) laser printed clear waterslide

***** MIX n Match ? ******

If there is another design/image on my website that you would like to be put on a waterslide let me know :). As this is one of our *** Mix n Match*** items :).

**if you see ***Mix n Match*** in the description on any item/product on our website, then it is an image/design that I can add to the other*** Mix n Match*** item/product as well.  So definitely keep an eye out for all the ***Mix n Match** design/images.***

This is a Laser Printed Graphic.


These will not be replaced due to application error.


Instagram: www.instagram.com/CustomgiftsbyKB
Twitter: @CustomGiftsbyKB
Facebook: www.facebook.com/CustomGiftsbyKB

***Note: Item color displayed in photos may be showing slightly different depending on your computer monitor since monitors are not calibrated the same.***

Additional information


1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

~Clear or White~

Clear, White

~Size ~

2", 3"

~WaterSlide or Sticker

Water Slide, Sticker


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.